Verfügbare Informationen zu "new unidentified P51 F-6D parts"
Qualität des Beitrags: Beteiligte Poster: Flyingkag - Paul - Pathfinder - crashsiteslimburg Forum: - Aero Part Identify Board - aus dem Unterforum: North American Antworten: 8 Forum gestartet am: Donnerstag 15.02.2007 Sprache: englisch Link zum Originaltopic: new unidentified P51 F-6D parts Letzte Antwort: vor 14 Jahren, 10 Monaten, 20 Tagen, 22 Stunden, 56 Minuten
Alle Beiträge und Antworten zu "new unidentified P51 F-6D parts"
Re: new unidentified P51 F-6D parts
Flyingkag - 13.06.2009, 23:28new unidentified P51 F-6D parts
Hi all,
here some just found unidentified parts of an F-6D. All these parts have been found together in a very little space in the ground and could come from the same place in the plane (?)
- the glass fragments, clear as crystal, could come from the gunsight? Are there other parts of thick glass on the Mustang?
- The white little part left is inside iron and outside porcelaine (isolator?)
- the three metal parts on the top are the same, made of inox metal
- the little rectangular parts look like paper, but are a kind of plastic; parts of a filter?
- the part over left is composed of two parts: the bolt is made of coper (yellow letal) and the other one (getting inside of it) is partly of inox, partly of "normal" iron.
could someone help?
Mathias-Flyingkag
Re: new unidentified P51 F-6D parts
Paul - 14.06.2009, 10:05
The three half circular parts are from the engine. Have to go over the manual though...
Regards,
Paul
Re: new unidentified P51 F-6D parts
Pathfinder - 15.06.2009, 17:53Re: new unidentified P51 F-6D parts
Flyingkag wrote:
- the glass fragments, clear as crystal, could come from the gunsight? Are there other parts of thick glass on the Mustang?
The part list say, the front glass is the only "armor glass"
Flyingkag wrote:
- The white little part left is inside iron and outside porcelaine (isolator?)
This could be from the antenna
Flyingkag wrote:
- the three metal parts on the top are the same, made of inox metal
I think Paul is right, this are locking plates
Flyingkag wrote:
- the little rectangular parts look like paper, but are a kind of plastic; parts of a filter?
No, this are the remains of the batterie cells
Flyingkag wrote:
- the part over left is composed of two parts: the bolt is made of coper (yellow letal) and the other one (getting inside of it) is partly of inox, partly of "normal" iron.
could someone help?
I think this bold comes from the radiator. I think some of copper bolds on this assembly was used here
Re: new unidentified P51 F-6D parts
Flyingkag - 15.06.2009, 21:29
Thanks a lot, Pathfinder and Paul,
The battery on crash site "exploded" and I have found pieces of it on a distance of more than 100 meters! The three inox parts were found mixed with lot of these battery little "papers". It could belong to the battery?
The grease used by the USAAF was of a very good quality; both bolts on this picture are still able to turn, and the grease on it is still "working" without having cleaned them!
About the glass in the Mustang, was the canopy made of plexiglas or glass(?).
Other parts found last week come in the following days. It now seems that some parts of the Mustang have been projected at a distance of more than 150 meters of the initial impact on the threes.
Thanks for your kindly help;
Mathias
Re: new unidentified P51 F-6D parts
Paul - 16.06.2009, 08:38
Mathias,
Armored glass of the windscreen was also found by me in Luxembourg. The cockpit canopy was made of plexiglas.
regards,
Paul
Re: new unidentified P51 F-6D parts
crashsiteslimburg - 16.06.2009, 09:31Re: new unidentified P51 F-6D parts
Flyingkag wrote: Hi all,
here some just found unidentified parts of an F-6D. All these parts have been found together in a very little space in the ground and could come from the same place in the plane (?)
- the glass fragments, clear as crystal, could come from the gunsight? Are there other parts of thick glass on the Mustang?
- The white little part left is inside iron and outside porcelaine (isolator?)
- the three metal parts on the top are the same, made of inox metal
- the little rectangular parts look like paper, but are a kind of plastic; parts of a filter?
- the part over left is composed of two parts: the bolt is made of coper (yellow letal) and the other one (getting inside of it) is partly of inox, partly of "normal" iron.
could someone help?
Mathias-Flyingkag
The big brass nut is from one of the cilinderheads.
Re: new unidentified P51 F-6D parts
Flyingkag - 16.06.2009, 23:16
Thanks;
on this big brass nut is one number: 600127 and an "S " on another face
Mathias
Re: new unidentified P51 F-6D parts
Paul - 17.06.2009, 11:57
Mathias,
That's correct. I have an identical one in use as a talisman.... :cool:
Paul
Mit folgendem Code, können Sie den Beitrag ganz bequem auf ihrer Homepage verlinken
Weitere Beiträge aus dem Forum - Aero Part Identify Board -
new unidentified P51 F-6D parts - gepostet von Flyingkag am Samstag 13.06.2009
Liberator video... - gepostet von Paul am Dienstag 21.08.2007
photo part German plane - gepostet von Ton bosmans am Samstag 11.04.2009
name the plane (10) - gepostet von pipistrello am Samstag 02.02.2008
another unknown German aircraft part - gepostet von Kurtl am Donnerstag 27.09.2007
6A/1519 Casing cover / Artificial Horizon Mk. IB - gepostet von Pathfinder am Sonntag 08.04.2007
Ähnliche Beiträge wie "new unidentified P51 F-6D parts"
Vorstellung! - gepostet von apollo13 am Mittwoch 07.06.2006
Türke??? - gepostet von kingkong am Sonntag 30.07.2006
Angreifer Iolares (5:110:11) LOL - gepostet von DemolischenMEN am Samstag 09.09.2006