Cisco 836 T-DSL Konfiguartion

Achtung !!!!!!!!!!!!!
Verfügbare Informationen zu "Cisco 836 T-DSL Konfiguartion"

  • Qualität des Beitrags: 0 Sterne
  • Beteiligte Poster: MiKro - crisirius
  • Forum: Achtung !!!!!!!!!!!!!
  • Forenbeschreibung: Umzug auf www.cisco-forum.net !!!!!
  • aus dem Unterforum: C800 Reihe
  • Antworten: 3
  • Forum gestartet am: Mittwoch 02.02.2005
  • Sprache: deutsch
  • Link zum Originaltopic: Cisco 836 T-DSL Konfiguartion
  • Letzte Antwort: vor 17 Jahren, 9 Monaten, 6 Tagen, 9 Stunden, 21 Minuten
  • Alle Beiträge und Antworten zu "Cisco 836 T-DSL Konfiguartion"

    Re: Cisco 836 T-DSL Konfiguartion

    MiKro - 20.06.2005, 12:08

    Cisco 836 T-DSL Konfiguartion
    Hallo,
    ich habe einen C836 und kann diesen nicht per Browser konfigurieren.

    C836 angeschlossen -> PC (Ip-dynamisch wird abgeholt) -> Eingabe
    IP-C836-> Abfrage Sprache -> "iocrtl" wird geprüft -> keine weiter
    Reaktion (auch nach 60min ).

    Hyperterminal

    IOS (tm) C836 Software (C836-K9O3Y6-M), Version 12.3(2)XC2, EARLY DEPLOYMENT REL
    EASE SOFTWARE (fc1)
    Synched to technology version 12.3(1.6)TCISCO C836 (MPC857T) processor (revision 0x300) with 58983K/6553K bytes of memor
    y.
    Processor board ID FHK0914221T (36505226), with hardware revision 0000
    CPU rev number 7
    Bridging software.
    Basic Rate ISDN software, Version 1.1.
    1 Ethernet/IEEE 802.3 interface(s)
    4 FastEthernet/IEEE 802.3 interface(s)
    1 ISDN Basic Rate interface(s)
    1 ATM network interface(s)
    128K bytes of non-volatile configuration memory.
    12288K bytes of processor board System flash (Read/Write)
    2048K bytes of processor board Web flash (Read/Write)



    Die LED's ADSL RxD und TxD blinken ständig.

    Was kann ich machen um den C836 per Web-Interface zu konfigurieren.
    Gibt es eine "Basic-Config" für T-DSL ?


    Danke Michael



    Re: Cisco 836 T-DSL Konfiguartion

    crisirius - 20.06.2005, 20:39


    Hi Mirko,

    schau dir mal diesen Cisco Script an:

    version 12.2
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    service password-encryption
    !
    hostname Router
    !
    logging queue-limit 100
    no logging buffered
    enable secret XXX
    !
    clock timezone MEZ 1
    clock summer-time MESZ recurring last Sun Apr 2:00 last Sun Oct 2:00
    ip subnet-zero
    ip subnet-zero
    ip dhcp excluded-address 10.0.0.1
    !
    ip dhcp pool DHCPPool
    network 10.0.0.0 255.255.255.0
    dns-server 194.25.2.129
    import all
    default-router 10.0.0.1
    !
    !
    ip inspect name myfw cuseeme
    ip inspect name myfw ftp
    ip inspect name myfw rcmd
    ip inspect name myfw realaudio
    ip inspect name myfw udp
    ip inspect name myfw tcp
    ip inspect name myfw h323
    ip audit notify log
    ip audit po max-events 100
    no ftp-server write-enable
    isdn switch-type basic-net3
    !
    interface Ethernet0
    ip address 10.0.0.1 255.255.255.0
    ip access-group 101 in
    no ip proxy-arp
    ip nat inside
    !
    interface ATM0
    no ip address
    backup delay 90 60
    backup interface BRI0
    atm vc-per-vp 64
    no atm ilmi-keepalive
    pvc 1/32
    pppoe-client dial-pool-number 1
    !
    dsl operating-mode annexb-ur2
    !
    interface Dialer1
    ip address negotiated
    ip access-group 102 in
    no ip proxy-arp
    ip mtu 1492
    ip tcp adjust-mss 1452
    ip nat outside
    ip inspect myfw out
    encapsulation ppp
    ip tcp header-compression
    ip tcp compression-connections 64
    no ip mroute-cache
    dialer pool 1
    dialer idle-timeout 120 either
    dialer string 1
    dialer-group 1
    no cdp enable
    ppp authentication pap callin
    ppp ipcp dns request
    ppp pap sent-username @t-online.de password
    !
    ip nat inside source list 1 interface Dialer1 overload
    !
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer1 permanent
    ip http server
    ip http secure-server
    !
    access-list 1 permit 10.0.0.0 0.0.0.255
    access-list 101 permit ip an any
    access-group 102 deny ip an any
    !
    dialer-list 1 protocol ip permit
    !
    no cdp run
    !
    line con 0
    exec-timeout 0 0
    transport output none
    stopbits 1
    line vty 0 4
    exec-timeout 0 0
    !
    end

    Mit diesem solltest du auch über http dich konekten können.

    Grüße

    Crisirius

    8)



    Re: Cisco 836 T-DSL Konfiguartion

    crisirius - 20.06.2005, 20:40


    Oder wenn du nur den http Zugriff haben möchtest geht das mit:

    ip http server

    Danach wird der http Server aktiviert.

    Grüße

    Crisirius
    :P



    Mit folgendem Code, können Sie den Beitrag ganz bequem auf ihrer Homepage verlinken



    Weitere Beiträge aus dem Forum Achtung !!!!!!!!!!!!!

    CCNA-Zertifizierung? Lohnt sie sich? bitte helft mir - gepostet von project25 am Montag 14.02.2005



    Ähnliche Beiträge wie "Cisco 836 T-DSL Konfiguartion"

    Wie schnell ist mein DSL? - [DTMR]Uwe-Racing (Freitag 14.07.2006)
    DSL 16.000 Probleme - jagger (Samstag 20.05.2006)
    dsl installation - smu83 (Mittwoch 24.01.2007)
    dsl langsamer als bestellt - raaabi (Mittwoch 24.01.2007)
    DSL wireless oder mit kabel - X (Donnerstag 09.09.2004)
    Cisco Systems auf der ANGA Cable 2005 - crisirius (Sonntag 15.05.2005)
    Kündigungsrecht bei zu langer wartezeit auf DSL - dailymen (Dienstag 30.08.2005)
    MARKUS HAT HALBES DSL!!!! - RF2 (Donnerstag 17.03.2005)
    Cisco Systems bereitet Unternehmen auf RFID vor - saarkohle (Dienstag 15.03.2005)
    Banner für die DSL... - ExtremeCoucher (Donnerstag 10.03.2005)